Machine
designed for Shot Blast Cleaning
of small or medium size iron,
steel, alloy and non-ferrous
castings, forgings, heat treated
parts, pressings and Fabrications
at the lowest possible cost. Capacity :
100 Kgs. Load 1.5 cft effective
volume. The cleaning rate depends
on nature of job, degree of surface
preparation required and type
of abrasive used.
Blast Wheel :
The most effective abrasive throwing
unit fitted capable of projecting
optimum quantity of abrasive
per horse power.
Low Maintenance :
Rugged and sturdy overall construction
of machine ensure minimum operational
and maintenance cost, where vulnerable
components are lined with wear
resistant materials.
Design :
Through tumbling action of the
barrel and slow speed rotation
of barrel, the protection of
delicate casting is ensured.
Controls :
All controls are centrally located
on the machine itself. All necessary
safety features are provided.
Timer :
The machine can be pre-set
for blasting cycle by Electronic/mechanical
Timer.
Leading
Technical Specification
Description
Model RBC-1
Model RBF-1
Flow
Rate of Wheel (Kg./Hr.)
1135
1135
Barrel Size (mm)
575 x 625 Length
575 x 625 Length
Barrel Capacity (Kg.)
100
100
Barrel Effective Volume (cft)
1.5
1.5
Barrel RPM
5-7
5-7
Loading Height (mm)
370
370
Type
of Dust Collector
Cyclone
Fabric Bag
Dust
Collector Capacity (cfm)
400
400
Hp
of Dust Collector
1
1
Total
Power Requirement (HP)
5
5
Initial Charge of Abrasive (Kg.)
35
35
Abrasive Blast Cleaning Cycle
15-20 Min. for Cast Iron
15-20 Min. for Cast Iron
Dimension of Machine with Dust Collector
Length (mm)
Width (mm)
Height (mm)
2600
1100
1800
2100
1700
2100
Dimension of Dust Collector
Length (mm)
Width (mm)
Height (mm)
1100
600
1800
900
700
2100
Floor Space required for Machine with Dust Collector
Length (mm)
Width (mm)
3000
1900
3400
2500
Note
: Above Specifications are
approximate and are subject to change
without notice.
